Home
Liquid Storage & Containment Accessory Parts Septic / Cistern OEM Custom Marine Products
Shaping the Future
 
Den Hartog Industries, inc.
Ace Roto Mold Rotational Molding
Injection Molding
Blow Molding
Sowjoy Metal Fabrication
Ace Dock Accessories
Home
About Us
Employment
Application Guideline
Press Releases
Track My Shipment
Used Trucks and Equipment
Contact Us
 
 

New 3" Bulkhead Fitting Assembly

New 50 Gallon Low Profile Tank

new Hang-R Pipe Hanger

New Spherical Pump & Cistern Tanks

October 19, 2007

Den Hartog Industries is proud to announce our newest addition to our Septic and Cistern tank line.

Features:

Single compartment tanks are designed for sustained external pressures of up to 500 PSF.

Tanks can be fully emptied while buried underground.

Tanks and access covers are manufactured from high-density polyethylene with U.V. stabilizers.

Tank access cover gaskets are manufactured from extruded Nitrile rubber.

Tanks are furnished with 24" diameter double-walled access covers.

Covers interlock with tank body using three bayonet keys.

Covers are capable of being secured into place withnylon wire tie and do not require metal fasteners for retention. 

See all of our septic tanks in the "Septic Tanks" category and our complete line of cistern tanks in the "Cistern Water Tanks" category of the "Septic/Cistern" section of the website. 

previous article
  |  press release menu  |   
next article

 

New 525 gallon Cistern and 500 gallon Pump Tanks

Cistern Features:

Product is designed to collect and store potable water providing the tank is handled, installed, used and maintained in observance with all county, state and federal codes.

-Dimensions 63" x 74", weight 194 lbs. 

-Tank is furnished with fitting flats designed to accept a variety of bulkehad fittings.

-Tanks and access cover are produced from an FDA approved natural resin.

Pump Tank Features:

Product is designed as a storage tank for wastewater generated by homes or businesses when properly installed in accordance with applicable county, state and federal codes.

-Dimensions 63" x 74", weight 197 lbs.

-Two access openings sealed to the tanks with rubber gaskets.

-Elevated pump mount for use as a pump tank.

-Tank inlet and outlet gaskets are manufactured from vulcanized rubber.

-Optional PVC plumbing kit available.

-Furnished with inlet and outlet designed to accept either 4" Schedule 40 PVC pipe or 4" Sanitary PVC pipe.

-Inlet and outlet features vulcanized rubber gaskets for sealing. Specify gasket size upon order.

 
     
Den Hartog Industries, Inc.
4010 Hospers Drive South, PO Box 425 Hospers, Iowa 51238 712-752-8432
sales@denhartogindustries.com | www.denhartogindustries.com
Accessory Parts Septic / Cistern OEM Custom Marine Products

Accessory Clips
Fittings
Hang-R
J-Bolts
Lids
Anchor Rite

Spinwelds

Cistern Water Tanks
Septic Tanks
Septic/Cistern Accessories
Septic/Cistern Reps
Rotational Molding
Injection Molding
Blow Molding
Metal Fabrication
Custom Reps
Commercial Floats
Ace Dock Accessories
Commercial Float
Distributors

Ace Dock Accessories Distributor

Liquid Storage & Containment Our Brand Names
Cone Bottom
Crop Care
Cut Away
Elliptical
Feed Carts
Free Standing Horizontal
Fuel
Gusseted Vertical
Horizontal
Inductor
Liquid Feeder
Open Top
Oval
Pallet Paks
Pest Control Operator
Pick Up
Specialty Bulk Storage & Applicator
Spot Sprayer
Stock
Tear Drop
Tractor Mounted
Vertical
Tank Reps
Ace Roto Mold - Rotational Molding
Injection Molding - Custom Injection Molding
Blow Molding - Custom Blow Molding
Sowjoy - Metal Fabrication
Ace Dock - Marine Products & Accessories