|
Blow Molded Spot
Sprayer and Applicator Tanks are designed for transportable
applications of residential, industrial or agricultural chemical
products.
-Features pump
mount and accessory clip inserts. Optional
accessory clips available.
-Tanks are manufactured
from high-density polyethylene with U.V. stabilizers.
-All tanks have
a low-profile, elliptical design.
-Ribbed side walls
offer additional strength.
-Liquid level indicators
are featured in both U.S. and metric measurements.
-Tanks are available
in natural and yellow colors.
-Molded-in stacking
lugs for shipping and storage
-Orders for these
tanks must be in pallet quantities.
Spot Sprayers:
-These tanks feature
a molded-in drain port and offer full drain out capability.
Optional drain cap and
cap tether
are available.
-Features molded-in
drain port that facilitates full drain-out capability.
-Optional drain
cap and cap tether are available
Applicator Tanks:
-These tanks feature
four injection-molded leg inserts which allow the tanks to be fastened
with
common 5/16"
bolt & washer.
-Furnished with
a 5" vented lid and lanyard assembly, outlet cap, tether and
gasket.
-The tanks are
furnished with a threaded outlet drain and cap on one end and a
utility port on the side
opposite
the wand clip mounting inserts. The port is closed until drilled
open by the customer.
Optional
locations for the utility port are available.
-One end of the
tank features sump flat that will accept up to 1/2" bulkhead
fitting.
-Bottom channel
sump promotes fluid drain-out.
Product Specifications
View
Blow-Molded Spot Sprayer brochure
Install free Adobe
Acrobat Reader.
Features
and Benefits
-
5" lids available:
-
Deluxe model with breather
-
Standard model
-
Lanyard-optional lid tether (standard model only)
-
Industry standard pump mounts
-
Large capacity hose wrap horns
-
Stacking bosses facilitate shipping and handling
-
Machine inserts for wand clips
-
Molded-in 3/4" drain port
-
Full drain-out capability
-
Drain cap and cap tether available
-
Liquid level indicator - US and Metric
-
Accessory Clips click
here for more information
- Corrosion-resistant SuperTough
black nylon
- Fits wands up to 1/2" diameter.
- The design and placement of the
screw in the center of the clip prevents
the base of the clip
from bowing against the tank.
- Lead-in bevels centers and seats
wand easily
- Tank is designed with an indent, which coincides
with the detent on the
clip. This feature will keep the clip from spinning.
|
