Spot Sprayers:
- These tanks feature a molded-in drain port and offer full drain out capability. Optional drain cap and cap tether are available.
- Features molded-in drain port that facilitates full drain-out capability.
- Optional drain cap and cap tether are available
Applicator Tanks:
- These tanks feature four injection-molded leg inserts which allow the tanks to be fastened with common 3/8″ bolt & washer.
- Furnished with a 5″ vented lid and lanyard assembly, outlet cap, tether and gasket.
- The tanks are furnished with a threaded outlet drain and cap on one end and a utility port on the side opposite the wand clip mounting inserts. The port is closed until drilled open by the customer.
- Optional locations for the utility port are available.
- One end of the tank features sump flat that will accept up to 1/2″ bulkhead fitting.
- Bottom channel sump promotes fluid drain-out.
Features & Benefits
- 5″ lids available:
Deluxe model with breather
Standard model - Lanyard-optional lid tether (standard model only)
- Industry standard pump mounts
- Large capacity hose wrap horns
- Stacking bosses facilitate shipping and handling
- Machine inserts for wand clips
- Molded-in 3/4″ drain port
- Full drain-out capability
- Drain cap and cap tether available
- Liquid level indicator – US and Metric
- Accessory Clips click here for more information
- Corrosion-resistant SuperTough black nylon
- Fits wands up to 1/2″ diameter.
- The design and placement of the screw in the center of the clip prevent the base of the clip from bowing against the tank.
- Lead-in bevels centers and seats wand easily
- Tank is designed with an indent, which coincides with the detent on the clip. This feature will keep the clip from spinning.
Black Nylon 5/16″ inserts are molded in
the bottom of the tank
-
Made of glass -filled nylon
-
Tested to be as effective as brass version
-
Please limit the fastening torque to 50″-lb
-
Thread engagement into the insert must be limited to a maximum of 1/2″ and a minimum of 3/8″
-
We recommend that flat washers and lock washers be utilized under the bolt heads.
If you are interested in ordering pallet quantities of blow-molded spot sprayer tanks, please contact our customer service department at 1-800-342-3408, or use the online form to contact us.
