The Hang-R Water Pipe Hanger is designed for easy installation of overhead water lines or other tubing. Injection molded from high density polyethylene, the Hang-R is durable and resilient to stresses. This unit will save you time and money on your installation project.
Specifications and Features:
The Hang-R has a 2-3/4″ inside diameter and 1″ width. It features a single 1/8″ screw mounting hole. Hang-R’s are sold in boxes of 150 units.
Easy Installation:
One #10 screw is required (not supplied) to secure the Hang-R to the mounting surface.
The 20 deg slant in the ring design allows the mounting screw to be driven straight up into the mounting surface.
A pre-formed 1/8″ diameter hole prevents screw slippage.
Part No. | Description |
12530 | 2-3/4″ Inside Diameter and 1″ Width |
Part No. | Description |