Lids
Accessory Parts

Lids

Lids for Ace Roto-Mold tanks are available in the following sizes. Standard lids that come included with each tank are listed in each tank table. The following lids are available as replacement parts. If you need assistance determining which replacement part your tank requires, call our customer service department at 1-800-342-3408. All accessory parts can be shipped via UPS/FedEx.

View Product Catalog Here

View technical drawings by clicking on the part number below.

Part No. Description
10631 2″ Spin on Kelch Cap
13108 3 1/2″ Vented Lid & Lanyard Assembly
19406 5″ Hinged Low-Profile
13748 5″ Threaded Non-Vented Lid
13696 5″ Threaded Lid w/ Vent
13697 5″ Threaded Lid w/ .25″ Vent Hole
13709 5″ Threaded Lid w/ 2 Way Step Vent
13714 5″ Threaded Lid w/ 2 Way Step Vent & Gasket
13715 5″ Threaded Lid w/ .25″ Vent Hole & Lanyard Assembly
13716 5″ Threaded Lid w/ Vent & Gasket
13717 5″ Threaded Lid w/.25 Vent Hold & Gasket
10921 6″ Lid and Ring Assembly
14834 6″ Cap without Port
14835 6″ Cap – 2.5-5 Buttress Thread
14836 6″ Cap – 2″ NPS Thread
14882 6″ Cap Without Port with Viton Gasket
14883 6″ Cap 2″ NPS Port Viton Gasket
14884 6″ Cap 2″ Buttress Port Viton Gasket
14887 6″ Cap Without Port Santoprene Gasket
14888 6″ Cap 2″ NPS Port Santoprene Gasket
14889 6″ Cap 2″ Buttress Port Santoprene Gasket
12414 7″ Spin-on Spring-Vented Lid
12415 7″ Spin-on Non-Vented Lid
12427 7″ Spin-on Lid w/ Step Vent
10525 8″ Threaded Vented Lid & Ring
14733 9″ Cap without Port
14734 9″ Cap – 2.5-5 Buttress Thread
14735 9″ Cap – 2″ NPS Thread
14737 9″ Cap Assembly No Port Santoprene Gasket
14738 9″ Cap Assembly 2″ NPS Port Santoprene Gasket
14739 9″ Cap Assembly 2″ Buttress Port Santoprene Gasket
14874 9″ Cap Assembly 2″ Buttress Port Viton Gasket
14875 9″ Cap Assembly 2″ NPS Port Viton Gasket
14876 9″ Cap Assembly No Port Viton Gasket
12460 12″ Self-Anchoring Lanyard
10526 12″ Threaded Non-Vented Lid & Ring
10527 12″ Threaded Vented Lid & Ring
10528 16″ Threaded Vented Lid & Ring
15082 16″ Hinged Vented Lid
15083 16″ Hinged Non-Vented
10530 22″ Threaded Vented Lid & Ring
10520 Breather Only (for 8″ & 12″ Lids)
10529 Breather, 4″ Center (for 16″ Lids)
10873 Short Lanyard – 12″
10534 Long Lanyard – 16″
19024 Outlet Cap, 3/4″
19025 Tether for Outlet Cap
10960 Gasket for Outlet Cap
Part No. Description